Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
brightness, the reflector flashes white 2 times to indicate to the user that the reflector has reached the limit.
Only in the Fixed Color WHITE - you can control the temperature of the white - Only in the remote control.
In the Remote Control you can Increase or decrease the White Temperature. The first time it's turned on, the
lighting is set in Cold White (maximum) and you can adjust the white temperature until warm white (minimum).
When the illumination reaches the minimum or maximum temperature, the reflector flashes white 2 times to
indicate to the user that the reflector has reached the limit.
Hold Function - Only in the Color Shows/Effects mode - During a color shows/effects, tap the button "HOLD" in
the remote control to capture a unique color effect. The lights displaying the captured fixed color. To release, press
Hold again.
Fixed Colors:
1-Fixed color white (10 intensity levels - 10 color temperatures Cold White / Warm White).
2-Fixed color red (10 intensity levels).
3-Fixed color blue (10 intensity levels).
4-Fixed color green (10 intensity levels).
5-Fixed color magenta (10 intensity levels).
6-Fixed Cyano (10 intensity levels).
7-Fixed color yellow (10 intensity levels).
Color Shows/Effects
8-Watercolor: Elegant transition of 16 million color (10 intensity levels - 10 Speeds levels - Hold Function available).
9-Party: Color changing with energy and dynamism (10 intensity levels - 10 Speeds levels - Hold Function available).
10-Sunset: Transitions of orange, red and magenta tones, giving a comforting feeling of sunset (10 intensity levels
- 10 Speeds levels - Hold Function available).
11-Caribbean: Transition between shades of blue and shades of green, like the Caribbean sea (10 intensity levels -
10 Speeds levels - Hold Function available).
12-Galaxy: Transition between white, magenta, blue and green colors (10 intensity levels - 10 Speeds levels - Hold
Function available).
13-Mexico: Transition between green, white and red colors, like the mexican flag (10 intensity levels - 10 Speeds
levels - Hold Function available).
14-Microphone: With the included microphone, you place the microphone next to a speaker, and the reflectors
pulse to the beat of the music. Making the pool a complement to your party with strobe effect.
Auto Colors Test
Whenever LED Light Controller Mini Light 2.0 is connected to the power, it goes through a test routine that
assists in verifying the installation. The reflectors turn on and off in the following order: Green> Red>
Green> Blue. In this way it is possible to see if the colors are connected correctly.
Observe carefully that the first color to flash must be green. It indicates that the controller memory is
OK. If the first color is blue, it means that the Mini Light 2.0 memory is erased, so the remote control
must be reprogrammed.
7
Installation and User's Guide
Publicidad
