Sunny SF-XF9925 Manual Del Usuario página 9

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at
(877-907-8669).
A
1
A
support@sunnyhealthfitness.com
STEP 6:
WARNING: Please ensure sufficient weights
A
are on the power zone strength rack and the
power zone strength rack is bolted to the
ground before using the resistance bands.
*NOTE: Φ13 Wood Screws and Expansion
1 Bolts are not included.
If the ground is made of wood material,
secure the 4 Connecting Pieces (No. A) on
A
Stabilizers (No. 1) to the ground using 4
Φ13 Wood Screws to bolt the power zone
strength rack.
If the ground is cement ground, please mark
the holes on the 4 Connecting Pieces (No.
A), then remove the power zone strength
rack, drill the holes and install 4 Expansion
Bolts into the ground. Move the power zone
strength rack back, align the holes with 4
Connecting Pieces (No. A) to the 4
Expansion Bolts and tighten them to bolt
the power zone strength rack.
The assembly is complete!
8
or 1-877-90SUNNY