Using the remote control to setup the week timer
Press the week timer button(14) 1st time to activate the function
and setup the current local time by pressing week timer adjustment
buttons(15) "+"/"-" and re-press the week timer button(14) and
display(B) will show"1d", and press again the week timer button(14) to
enter the adjustment mode and the digital display showing "--", then
press the week timer adjustment buttons(15) "+"/"-" to setup the time
to turn on and turn off the unit, and press the week button (14) 4th time
to setup the temperature.
Repeat the actions above to setup the time and temperature for other
groups and different days.
Maintenance and cleaning/Disposal/Information
Cleaning the frame
•
In no case should aggressive or corrosive cleaning agents be
used. Otherwise damage to the pro duct could result.
•
Clean the frame with a slightly dampened cloth.
•
Clean the ventilation slots regularly and thoroughly 1 (e.g. with
a vacuum cleaner) so that no dust can accumulate.
•
Clean the glass plate 3 with a damp cloth and if necessary with
a glass cleaner.
Cleaning the interior
ATTENTION! RISK OF INJURY! The edges of the electric wall heater
are very sharp. Therefore, please wear protective gloves during all
maintenance work.
ATTENTION! In no case should aggressive or corrosive cleaning
agents be used. Otherwise product damage could result.
ATTENTION! Please make sure that the glass plate 3 does not fall.
Otherwise damage to the product could result.
•
Now clean the frame with a damp cloth and if necessary with a
mild cleaning agent.
•
Clean the glass plate 3 with a damp cloth and if necessary with
glass cleaner.