Publicidad
Idiomas disponibles
Idiomas disponibles
EN-US
Introduction
Thank you so much for choosing a Stetsom product! The chosen amplifier
was developed with cutting-edge technology for those looking for high
performance and versatility in audio systems thanks to its automatic
impedance system, which adjusts the parameters when using various
speakers on the market.
Before installing
Read this manual carefully before using the product.
▪ All connections should be made with the product turned OFF.
▪ A fuse must be installed between the amplifier and the battery to protect
against overloads. It should be installed as close as possible to the battery.
Check which fuse is most appropriate based on your consumption.
▪ Use the gauges recommended in this manual to avoid overheating the
cables and to obtain maximum power.
▪ Keep cables as short as possible to increase sound fidelity and avoid
possible power losses.
▪ Route the installation cables as far as possible from the vehicle's original
wiring to avoid interference and noise in your audio system.
▪ Install it on a firm surface in a ventilated, dry place.
▪ Installation should only be performed by a qualified professional.
If you have questions, contact the store where the purchase or
installation was done. For more information, please contact our
Customer Service: BR +55 18 2104-9412.
2
Publicidad
