Bulldog DC Serie Manual De Instrucciones página 7

3. The fairlead does not mount directly to the winch.
4. The wire/synthetic rope shall be under wound. Figure 4.
Bolt Pattern & Minimum Mounting Surface - Pattern Is Not To Scale
1.3 Determine Mount Position
WARNING
Failure to adequately align, support, or attach the winch to a suitable mounting base could
result in a loss of efficiency of performance or damage to the winch, wire/synthetic rope and
mounting surface.
The mounting surface must be equal to or greater than the footprint of the winch frame.
CEQUENT
Installation Instructions
Figure 2 - Mounting Hole Pattern and minimum surface areas
DC9.0 & DC12.0 - Bottom View
11.57
10.00
.41 x 4
Figure 3 - Mounting Position
Under-Wound
CORRECT
Roller
Fairlead
PERFORMANCE PRODUCTS, INC. •
™
4.50
OUT
IN
F4024-00 REV C (7026) 7/16
6.14
7