BURY CP 1000 CarPhone LTE Guía Rápida página 19

EN Power supply
The power supply of the BURY CP 1000 CarPhone LTE is established via a 4-core cable. Connect the black (clamp
31 – minus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the power supply
of your radio (where required via the cigarette lighter or the fuse box). After connection to the counterpart, the
yellow cable provides for radio muting during a phone conversation. Please connect the white Molex connector
with connection 1.
Attention:
X Do not connect your device to the power supply or switch it on
until instructed to do so in the installation instructions.
Attention:
X If you also connect the blue cable to clamp 30 (steady posi-
tive), the BURY CP 1000 CarPhone LTE will be permanently sup-
plied with power. If the vehicle is not running for a longer pe-
riod, this could lead to a discharge of the car battery.
X If you deviate from the specified connection descriptions it
may be the case that certain functions on the BURY CP 1000
CarPhone LTE (e.g. the on-call duty) will not function correctly.
19