NAIM 300 Serie Guia Del Usuario página 7

3.1 Connecting your NAC 332 to the NAP 350 power amplifiers
Connect two XLR cables (supplied with the NAP 350) from the XLR outputs of the
NAC 332 to the XLR inputs of each NAP 350. Ensure the cables are channel-matched: the
pre-amplifier left output is connected to the power amplifier driving the left speaker and
the same for the right. Please ensure that the XLR plugs are inserted correctly, which is
achieved with the Naim logo on the plug facing upwards.
Connect the system automation cables (supplied with the NAP 350) between the
NAC 332 Remote Out terminals and the Remote In terminals on the NAP 350.
3.2 Connect your source components
Connect your source components to the NAC 332 inputs as required. The front panel
buttons may be assigned to select any input, see section 4.2
The factory default assignments are:
Tuner Input 3
Stream Input 7
AV Input 4
Phono Input 6
AUX Input 1
CD Input 8
3.3 Powering up
Once you have connected your sources and the NAC 332 to the power amplifiers, there
are just a few more simple steps to take before you can power up your NAC 332 and start
playing music.
Connect the two supplied link plugs to the NAC 332 power supply upgrade sockets.
Power
AC ONLY
Brightness
FUSE RATING: ANTISURGE
/ Reset
1 0-120 V: 1 T4AL
2 0-240 V: 2 T2AL
FREQUENCY: 5 / 0 60Hz
I NPUT POWER: 70VA
USB
update
1
2
WARNING: Disconnect power before opening
RCA
5 pin DIN
RCA
8 pin DIN
XLR
5 pin DIN
R 1 L
R emote
R 3
in
Instant
on
R 4
Auto
standby R 2 L
R emote
R 5
out
300 SERIES
L
PREAMPLIFIER
Contains FCC ID: 2ACURZIGEE IC ID: 12217A-ZIGEE
L
Type 4
DESIGNED AND MADE IN THE UK
L BY NAIM AUDIO, SALISBURY, SP1 2LN
NAC 332
Analogue Inputs Analogue Inputs R
Refer to User Manual
6 7 8
Refer to User Manual
Type 3
Default
Ground
Ground
XLR L
O On
RCA
output
R RCA L
4 4