geberit KSS-160 Manual De Instrucciones página 11

General information
Note on this document
The original instructions were written in German. All other language versions are translations of the original
instructions.
Basic safety notes
Intended use
The Geberit KSS-160, KSS-200 and KSS-315 welding plates may be used for butt-welding
connections of Geberit PE and Geberit Silent‑db20 pipes and fittings only:
• Geberit KSS-160 welding plate for Geberit PE and Geberit Silent‑db20 d32–160 mm
• Geberit KSS-200 welding plate for Geberit PE and Geberit Silent‑db20 d32–200 mm
• Geberit KSS-315 welding plate for Geberit PE d200–315 mm
Any other use or a use extending beyond this is deemed to be improper. Geberit will not
accept any liability for any resulting damage.
User qualifications
Without suitable training, users cannot recognise or may incorrectly estimate the hazards
presented by Geberit welding plates. They are therefore at risk of seriously injuring
themselves or others.
• Only skilled persons qualified in pipe installations are permitted to use Geberit welding
plates.
• Users must be conversant with – and adhere to – country-specific safety regulations.
• Users working with a Geberit welding plate for the first time must have been instructed by
an expert or have attended a specialist course on how to handle it safely.
Following information and instructions
WARNING
Read all safety warnings, instructions, illustrations and specifications
provided with this power tool.
Failure to follow all instructions listed below may result in electric shock, fire and/or
serious injury.
▶ Save all warnings and instructions for future reference.
Read through and observe the following documents before commissioning:
• These operating instructions
• The accompanying "General safety notes for power tools" document
9083854987 © 10-2021
970.901.00.0(00)
EN
11