Publicidad
Idiomas disponibles
Idiomas disponibles
How to use High Flow Inflator/
Deflator Adapter Body
1.
Place the universal valve adapter
over high flow inflator/deflator
adapter body as shown.
2.
Press lever on universal valve
adapter down to lock in place.
NOTE: If the universal valve
adapter will not lock in place pull
it away from the adapter body so
it is not flush.
3.
Choose nozzle to be used to
inflate or deflate. NOTE: The seal
ring may be used with any of the
nozzles to prevent air from leaking
out of inflatables with very large
air inlets.
4.
The high flow inflate/deflate
adapter body attachment has an
"inflation" outlet and "deflation"
outlet. Attach the nozzle to
the preferred outlet. NOTE:
"Inflation" and "Deflation" are
marked at outlets.
Nozzle
attached to
"deflation"
outlet
A10087
Nozzle
attached to
"inflation"
outlet
5.
Insert nozzle into inflatable and
then start inflator, see "How to
Start" paragraph.
NOTE: If inflatable is not getting
firm enough, place thumb over the
"deflation" outlet to allow air to go
directly into the inflatable.
inflate. Keeping thumb over
"Deflation" outlet could cause
inflatable to over-inflate. Use
caution when placing thumb over
"Deflation" outlet.
12- ENG
Risk of Bursting.
DO NOT over-
Publicidad
