Setting the On/Off timer
Setting the Off timer
When the air conditioner is on;
Remote controller display
When the air conditioner is off
When set time on On timer is shorter than Off timer
Ex) On timer : 3 hours, Off timer : 5 hours
- The air conditioner will turn on after 3 hours from the
moment you have set the timer and the air conditioner will
remain on for 2 hours and then turn off automatically .
• Set time for the On timer and the Off timer should be different from each other .
Midea ODM Latin America IB&IM_HP_EN.indd 18
1 . Press the Timer button .
2 . Press the
button until (Off) indicator starts to blink .
3 . Press the SET button to set the Off timer .
- (Off) indicator will keep blinking and you can set the time .
4 . Press the
button to set the time .
- You can set the time in half hour unit from 30 minutes (0 . 5 on the display) ~
3 hours and hour unit from 3~24 hours .
- Time can be set from minimum 30 minutes to maximum 24 hours .
5 . Press the SET button to complete the Off timer setting .
- (Off) indicator and the set time of the timer will be displayed on the remote
controller display and the Timer indicator will be lighted up on the indoor unit
display .
- Off timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time . Therefore, check for the (Off) indicator on the
remote controller display and the Timer indicator on the indoor unit display .
f Press the
Cancel
and press the SET button .
f Press the Power button .
• When the On timer and the
simultaneously, the air conditioner will only apply the function that
was set later .
• Off timer may not work depending on the On/Off status of the indoor
unit and the On/Off status of the indicator on the remote controller
display.
Combining On Timer and Off Timer
When set time on On timer is longer than Off timer
Ex) On timer : 3 hours, Off timer : 1 hour
- The air conditioner will turn off after 1 hour from the
moment you have set the timer and turn on after 2 hours
from the moment it was turned off .
English-18
button to make the set time to display as
function is set
When the air conditioner is on
,
2014/6/11 11:42:36