Publicidad
Idiomas disponibles
Idiomas disponibles
PROBLEM
Air flow
adjustment is not
working.
Fan speed
adjustment is not
working.
Remote controller
is not working.
Timer function
does not set.
The indicator
is blinking
continuously.
Odors permeate in
the room during
operation.
Error is indicated.
Noise is generated. • D epending on the status of the air conditioner usage,
Smoke is
generated from
the outdoor unit.
Water is dropping
from the outdoor
unit piping
connection.
Midea ODM Latin America IB&IM_HP_EN.indd 27
SOLUTION
• C heck if you have selected
you cannot adjust the air flow direction. (If the
mode is operating in Heat mode, you can adjust the air
flow direction.)
• C heck if you have selected Auto/Dry/
In these mode, fan speed is set to Auto and you cannot
adjust the fan speed.
• Check if your batteries are depleted.
• M ake sure nothing is blocking your remote controller
sensor.
• C heck that there are strong lighting apparatus near the air
conditioner. Strong light which comes from fluorescent
bulbs or neon signs may interrupt the electric waves.
• C heck if you press the Set button on the remote
controller after you have set the time.
• P ress the Power
switch off the auxiliary power switch.
If the indicator is still blinking, contact the service center.
• C heck if the appliance is running in a smoky area.
Ventilate the room or operate the air conditioner in Fan
mode for 1~2 hours. (We do not use smelly components
in the air conditioner.)
• Check the Drains have been cleared Regular Maintenance.
• W hen an indoor unit indicator blinks, contact the nearest
service center. Please ensure the error code is passed onto
the service center when booking the service call.
noise can be heard when refrigerant flow movement
changes. It is normal.
• I f may not be a fire but it can be a steam generated by the
defrost operation from outdoor heat exchanger during
Heat mode in winter.
• W ater may be generated because of the temperature
difference. It is normal.
English-27
mode. In cool mode,
button or disconnect the power plug/
mode.
2014/6/11 11:42:38
Publicidad
