Descargar Imprimir esta página

NUTRIBULLET NB2-10 Guia Del Usuario página 8

Publicidad

Idiomas disponibles

Idiomas disponibles

nutribullet
cup
®
assembly & use.
1
Review all warning and
caution statements in the
Important Safeguards
section (pg 2-5) before
proceeding to Step 2.
2
Place the motor base on
a clean, dry, level surface
such as a counter or table.
3
Add ingredients to
the nutribullet
cup.
®
NOTE:
Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
4
Twist the easy-twist
extractor blade onto the
cup until tightly sealed.
14
Handle the easy-twist extractor
blade assembly with care, as
the blades are sharp.
Never leave the appliance
unattended while in use.
NEVER BLEND HOT
INGREDIENTS,
as doing so
may cause excessive pressure
buildup, resulting in risk
of personal injury and or
property damage.
5
Plug the power cord into
an electrical outlet and
press
POWER
to turn on
the blender.
6
Turn the cup upside down
and place it onto the motor
base, gently turning the
cup clockwise to lock into
the motor base.
7
To start blending, select
EXTRACT
a speed or the
program on the blending
control panel. This program
will turn off automatically.
Buttons will illuminate while
in use.
NOTE:
Proceed to the blending
control panel chart on page 16
for speed definitions.
8
When you have reached
your desired consistency,
pause/stop the appliance
by pressing
POWER
or the
speed you selected and wait
for the blades to stop turning.
The unit will enter idle-mode.
POWER
The
button will
remain illuminated.
NOTE:
speeds will automatically
shut off after 60 seconds.
9
POWER
Press
to turn off
the unit completely.
10
Unlock the assembly by
gently twisting the cup
counterclockwise. You will
hear a click. Enjoy!
NOTE:
Blending should not require
longer than one minute to yield
smooth and creamy results.
CAUTION
Do not remove the easy-twist
extractor blade from the
nutribullet
cup until blending has
®
completely ceased. Do not use
the easy-twist extractor blade
as a storage lid for your cup.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. When storing
contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from
your body when unsealing.
15

Publicidad

loading