NUTRIBULLET NBF-10B Manual De Instrucciones página 2

• If the nutribullet blends for longer than one minute, friction
®
from the blades can cause ingredients to heat and generate
internal pressure inside the vessel. If a blending vessel
becomes warm to the touch, turn off the machine and allow
the vessel to cool completely before carefully opening, pointed
away from your body to avoid injury.
• ONLY USE THE TAMPER PROVIDED TO PUSH INGREDIENTS
TOWARDS THE BLADE. NEVER USE YOUR FINGERS OR
ANY PART OF YOUR HAND TO PUSH INGREDIENTS DOWN
TOWARD THE BLADE.
BLADE SAFETY
BLADES ARE SHARP! HANDLE CAREFULLY. To avoid laceration
injury, do not handle or touch any blade edge. • Take care
when emptying vessels and during cleaning. • AVOID
CONTACT WITH MOVING PARTS! To reduce the risk of severe
personal injury, keep hands and utensils out of and away from
blades while blending food. • After blending, wait to remove
the pitcher from the motor base until the blades comes to a
complete stop and the unit powers down completely. Taking
the vessel off the unit prior to complete power down can cause
damage to the blade coupling or motor gear. • NEVER BLEND
WITHOUT LIQUID AS DOING SO MAY DAMAGE THE BLADES
OR MOTOR. The nutribullet
ice crusher or without liquids. Always add liquid to your recipe.
• DO NOT USE nutribullet Blender for grinding dry ingredients
®
such as grains, cereal, or coffee, as this may damage the
motor and blade.
VESSEL SAFETY
• TO AVOID LEAKAGE, DO NOT OVERFILL THE PITCHER! The
pitcher is marked with two MAX lines: one for solid ingredients
(higher line) and one for liquid ingredients (lower line).
Exceeding the indicated MAX lines can result in leakage, and
may lead to dangerous pressurization. • The pitcher is specific
to the exact model of nutribullet
is not intended to be used as an
®
Blender you possess. Use of
®
2
incompatible parts (parts from other models) may result in
damage to your nutribullet
®
• Periodically inspect all nutribullet
wear. Discontinue use and replace blending vessels if you detect
cracking, cloudiness, or other damage to the vessel. Never use a
pitcher that does not properly align with the blade.
ELECTRICAL SAFETY
• Do not use this product in locations with different electrical
specifications or plug types or with any type of plug adapter
or voltage converter device, as these may cause electrical
shorting, fire, electric shock, personal injury or product
damage. Do not modify the plug or motor base in any way.
Doing so will increase risk of injury and void the product's
warranty. • The use of attachments, including canning jars, is
forbidden and may cause fire, electric shock, personal injury,
or product damage and will void the warranty. • To avoid
risk of electric shock, never immerse the cord, plug, or motor
base in water or other liquids which can conduct an electrical
current. • Always POWER OFF and UNPLUG the nutribullet
when it is not in use, and BEFORE assembling, disassembling,
changing accessories, or cleaning. • Periodically inspect the
cord, plug, and machine for damage. Do not operate the
nutribullet if its cord or plug is damaged. Cease operation
®
of the nutribullet if it has been dropped or damaged, or if it
®
malfunctions in any manner {including making a louder-than-
normal or abnormal sound when blending). • CAUTION: In
order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through
an external switching device, such as a timer, or connected
to a circuit that is regularly switched on and off by the utility.
• Do not allow the cord to hang over the edge of the table or
counter. • Do not pull or damage the power cord. • Do not
allow cord to touch hot surfaces, including the stove. • Do not
modify the plug in any way, as doing so will void the warranty.
• If the supply cord is damaged, it must be replaced by the
Blender or create safety hazards.
components for damage or
®
3
®