Descargar Imprimir esta página

NUTRIBULLET NBF-10B Manual De Instrucciones página 3

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
VENTILATION SAFETY
• To prevent a fire hazard, power base openings (underneath
the motor base) should be free of dust and lint and never
obstructed with flammable materials such as newspapers,
tablecloths, napkins, dishtowels, place mats, or other similar
type of materials. • CAUTION! Always operate the nutribullet
on a level surface, leaving unobstructed space beneath and
around the motor base to permit proper air circulation.
MICROWAVE & STOVE-TOP HEATING SAFETY
• Do not place any of the nutribullet
oven or stove-top pot or immerse in boiling water as this may
result in damage.
MEDICAL SAFETY
• The information contained in this user guide is not meant
to replace the advice of your physician. Always consult your
physician regarding health and nutrition concerns.
CLEANING & MAINTENANCE INSTRUCTIONS
• Please follow the below cleaning instructions before the first
use, and after each use. Cleaning the nutribullet
easy. The pitcher is dishwasher safe. Be careful if hot liquid
is poured into the blender as it can be ejected out of the
appliance due to a sudden steaming.
HERE'S HOW TO CLEAN THE NUTRIBULLET
• STEP 1: ALWAYS POWER OFF and UNPLUG the motor base
from the outlet when it is left unattended, before assembling,
disassembling, changing accessories or approaching parts
that move in use or when cleaning. Do not attempt to handle
the appliance until all parts have stopped moving!
parts in a microwave,
®
Blender is
®
®
4
• STEP 2: Detach the pitcher from the motor base. • STEP 3:
Clean the individual components as follows:
• MOTOR BASE: To avoid risk of injury, NEVER attempt to clean
the actuator system on the motor base while the nutribullet
is plugged in. Do not attempt to remove any pieces from the
motor base. NEVER submerge the motor base in water. Use
a sponge or dish cloth dampened with warm soapy water to
wipe down the motor base until clean. If necessary, you may
use a small brush to scrub the actuator system area to ensure
®
it's clean.
• NUTRIBULLET
recommend rinsing and briefly scrubbing it with a dish brush
to remove any dried debris before placing in the dishwasher.
NEVER use the sanitize cycle to wash the pitcher – heat this
high can warp the plastic.
• TAMPER: Always hand wash the tamper with soap and water.
SAVE THESE INSTRUCTIONS!
Pitcher Assembly & Use
1. Place motor base on a clean, dry, level surface such as a
counter or table.
2. Place the pitcher onto the motor base, handle facing to the
right of the blending control panel. Gently twist clockwise
to lock the pitcher in place.
3. Add ingredients to the pitcher, making sure they do not
exceed the MAX lines.
4. Place the pitcher lid with vented lid cap attached on the
pitcher, making sure it's aligned to the handle.
5. Plug the power cord into an electrical outlet.
6. To start blending, select a speed on the control panel.
7. When you have reached your desired consistency, pause/
stop the appliance by pressing POWER.
PITCHER: The pitcher is dishwasher-safe. We
®
5
®

Publicidad

loading