Descargar Imprimir esta página

EAS ELECTRIC EMSS179AX1 Manual De Instrucciones página 40

Frigorífico americano
Ocultar thumbs Ver también para EMSS179AX1:

Publicidad

Idiomas disponibles

Idiomas disponibles

4.3 Cleaning the ice bin
If ice accumulates in the ice bin, it can clog up
and block the outlet. In this case you should
clean the ice bin and remove the ice.
1) Press the ICE OFF button to cancel ice
making and turn off the refrigerator.
Holding the bin components with both
hands, pull them upwards and outwards
to remove them.
2) Remove the lid and clean the bin with
neutral detergents, a clean cloth and
water. Follow the steps in reverse to
reassemble.
3) Close the door, plug in the power plug and
press the ICE OFF button to activate ice
making.
4.4 Cleaning the glass shelf
As the back of the refrigerator that contacts the shelf has
a stop, the shelf must first be lifted out before it can be
removed.
Adjust and clean the shelf as needed.
4.5 Cleaning of the ice lattice and water pipes
If the ice making function has not been used for a long time, before using it again,
empty the container completely, then allow half a container of ice to be made (about
24 hours) and empty it again.
Similarly, before using the water dispenser again after a long time, empty 2 litres of
water and then you can use it normally.
4.6 Defrosting
The refrigerator is designed on an air-cooling principle and therefore has an automatic
defrosting function. If some frost forms due to seasonal or temperature changes, it can
be removed manually by disconnecting the appliance from the power supply or with a
dry cloth.
4.7 Prolonged periods of disuse
Power failure: In the event of a power failure, the food inside the appliance can be
preserved for several hours, even in summer. During a power failure, reduce the
opening times of the door and do not put any more food in the refrigerator.
If the appliance is not to be used for a long time: The appliance should be unplugged
and then cleaned and the doors should be left open to prevent odours from forming.
Moving: Before moving the refrigerator, remove all objects inside, tape down the glass
shelves, vegetable drawer, freezer drawers, etc., and tighten the levelling feet. Close
the doors and secure them with adhesive tape. When moving the appliance, it must
not be placed upside down or horizontally, and any jolting must be avoided. The
inclination during movement must not exceed 45°.
The appliance shall run continuously once it is started. Generally, the
operation of the appliance shall not be interrupted, otherwise the service
life may be impaired.
tope
19
contenedor de
hielo
tapa del conte-
nedor de hielo
levante el estante y tire de él
V.2

Publicidad

loading