Descargar Imprimir esta página

APEX FORGE M12 Manual Del Usuario página 10

Publicidad

Idiomas disponibles

Idiomas disponibles

h)
Use extra caution when making a "pocket cut" into existing walls or other blind
areas. The protruding wheel may cut gas or water pipes, electrical wiring or
objects that can cause kickback.
Additional safety instructions for wire brushing operations
Safety warnings specific for wire brushing operations:
a)
Be aware that wire bristles are thrown by the brush even during ordinary
operation. Do not overstress the wires by applying excessive load to the brush.
The wire bristles can easily penetrate light clothing and/or skin.
b)
Allow brushes to run at operating speed for at least one minute before using them.
During this time no one is to stand in front or in line with the brush. Loose bristles
or wires will be discharged during the run-in time.
c)
Direct the discharge of the spinning wire brush away from you. Small particles and
tiny wire fragments may be discharged at high velocity during the use of these
brushes and may imbed in your skin.
Battery tool use and care
a)
Recharge only with the charger specified by the manufacturer. A charger that is
suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b)
Use power tools only with specifically designated battery packs. Use of any other
battery packs may create a risk of injury and fire.
c)
When the battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can make
a connection from one terminal to another. Shorting the battery terminals together
may cause burns or a fire.
d)
Under abusive conditions, liquid may be ejected from the battery; avoid contact.
If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may cause irritation or burns.
Service
a)
Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
For the charger
Intended use
Charge only rechargeable battery packs. Other types of batteries may burst to cause
- 07 -

Publicidad

loading

Productos relacionados para APEX FORGE M12