Publicidad
Idiomas disponibles
Idiomas disponibles
Shield Rotary Tool Attachment
The rotary shield attachment provides a clear and simple solution for redirecting
debris and sparks away from the user without interfering with the task at hand. The
tool shield can be used with right- or left-hand grip positions and works to deflect
debris on a variety of applications, including cutting, sanding, grinding and polishing.
The shield can be quickly adjusted into position, provides easy access to the
accessory without interfering with the workpiece.
Installation Instructions:
Step 1. Remove the housing cap A from the end of the tool and set housing cap
aside. The original housing cap must be reinstalled when this attachment is not used.
(See Figure 10)
Step 2. Screw the Shield onto the tool using the lock nut B . (See Figure 11)
Step 3. Position the Shield such that it will redirect debris, sparks, and dust away
from the user using the positioning tabs C . (See Figure 12)
Using the Shield Rotary Tool Attachment:
Always turn tool power off before adjusting position, changing accessory, and
removing attachment. Rotary Tools cut, sand, grind, and polish in many directions.
To accommodate the Rotary Tool's Maneuverability, the Shield can be quickly
positioned and repositioned with a turn to the right or left .To extend the life of the
Shield periodically clean with a soft bristle brush or compressed air.
F
F
g i
g i
1 .
1 .
0
A
Fig.11
- 16 -
F
F
g i
g i
1 .
2
C
B
C
Publicidad
