Descargar Imprimir esta página

APEX FORGE M12 Manual Del Usuario página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

personal injury and damage.
a)
The appliance is not to be used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction
b)
Children being supervised not to play with the appliance
c)
Do not recharge non-rechargeable batteries!
d)
During charging, batteries must be placed in the well-ventilated area!
e)
Integrated batteries may only be removed for disposal by qualified personnel.
Opening the housing shell can destroy the power tool. To remove the battery from
the power tool, press the On/Off switch until the battery is fully discharged.
Unscrew the screws on the housing and remove the housing shell in order to
remove the battery. To prevent a short circuit, disconnect the connectors on the
battery one at a time and then isolate the poles. Even when fully discharged, the
battery still contains a residual capacity, which can be released in case of a short
circuit.
Electrical safety
When using electric machines always observe the safety regulations applicable in
your country to reduce the risk of fire, electric shock and personal injury. Read the
following safety instructions and also the enclosed safety instructions.
Rechargeable battery
Input of charger
Output of charger
Battery charging time
Maximum disc diameter
No load speed
Capacity of spring chuck
Weight
TECHNICAL SPECIFICATIONS
12V Max Li-ion 2000mAh
100-240V~ 50/60Hz 0.2A
13.5V DC 1.5A
1 - 2 hours
Ø35 mm
,000–35,000/min
Ø3.2 mm Max.
- 08 -
0.6 kg

Publicidad

loading

Productos relacionados para APEX FORGE M12