APEX FORGE M4 Manual Del Usuario página 13

Charging Tool
NOTE! The Mini Grinder does not come completely charged from the factory.
Be sure to charge tool prior to initial use.
- Insert USB-C charging cable(K) into USB port of power adapter. If power adapter is not included, charge tool using 5V/1A minimum USB power
adapter.
- Plug power adapter into standard power outlet.
Open USB port cover and plug USB-C plug into USB-C charger port .
-
The battery charge indicator indicates the charging progress. During the charging process, the indicator will glow RED. The battery is fully
charged when the indicator light will glow Green.
Charge time is approximately 2-3 hours.
It is normal for the handle of the tool to get warm during charging.
Note: charging function stops while tool is running and resumes again after tool is turned off.
When the battery is fully charged, disconnect the USB-C end of the cable from the tool and close the cover .
Unplug the power adapter from the power outlet (unless you are charging another tool).
- 11 -