Brickcom MD-100A Guía Rápida De Instalación página 7

5) Hammer the three plastic anchors provided in the product package into the
three location holes.
6) The user needs the three screws which are included in the product package
and a screwdriver. Mount the camera on the wall or ceiling and position
the three screw slots over the plastic anchors. Insert the three screws
provided in the product package into the holes and use a screwdriver to
tighten the screws clockwise until they are secure.
NOTE - For assembling the waterproof connector, please refer to the
instructions included in the connector package.
7