Publicidad
Idiomas disponibles
Idiomas disponibles
Cellular Configuration
For models equipped with the cellular modem, insert a valid cellular (WCDMA) SIM card as detailed in
previous steps (page 17) to start cellular connection. Consult with local operator to activate data service
on the SIM card beforehand. Disable PIN check on the SIM card before inserting the card into the
modem. Request APN information from the operator and make sure APN is configured correctly via the
configuration tool.
Firmware Update
Firmware updates can be made via the USB port on the bottom of the cabinet.
1. Obtain a USB flash drive. The drive format should be FAT/FAT32, < 32GB.
2. Insert the USB flash disk into the USB port on the bottom of the unit (labeled USB).
The updated firmware is uploaded to the DC Wallbox.
3. Close the protection cover. The cover has a hole to put lock into it to avoid tampering.
The status is displayed on the panel.
4. Close the protection cover. The cover has a hole to put padlock into it to avoid tampering.
Installation and Operation Manual
24
System Configuration
Publicidad
