Publicidad
Idiomas disponibles
Idiomas disponibles
WARNING
To avoid possible electric shock or personal injury, and to avoid possible
damage to the Digital multimeter or to the equipment under test,
adhere to the following rules:
Before using the Digital multimeter inspect the case. Do not use the
Digital multimeter if it is damaged or the case (or part of the case) is
removed. Look for cracks or missing plastic. Pay attention to the
insulation around the connectors.
Inspect the test leads for damaged insulation or exposed metal.
Check the test leads for continuity.
Do not apply more than the rated voltage, as marked on the Digital
multimeter, between the terminals or between any terminal and
grounding.
The rotary switch should be placed in the right position and no any
changeover of range shall be made during measurement is
conducted to prevent damage of the Digital multimeter.
When the Digital multimeter working at an effective voltage over
60 V in DC or 30 V RMS in AC, special care should be taken for there
is danger of electric shock.
Use
the
proper
measurements.
Do not use or store the Digital multimeter in an environment of high
temperature, humidity, explosive, inflammable and strong magnetic
field. The performance of the Digital multimeter may deteriorate
after dampened.
When using the test leads, keep your fingers behind the finger
guards.
Disconnect circuit power and discharge all high-voltage capacitors
before testing resistance, continuity, diodes .
Replace the battery as soon as the battery indicator "
With a low battery, the Digital multimeter might produce false
readings that can lead to electric shock and personal injury.
Remove the connection between the testing leads and the circuit
being tested, and turn the Digital multimeter power off before
opening the Digital multimeter case.
terminals,
function,
ENGLISH
and
range
for
" appears.
your
Publicidad
