JBM 60044 Manual De Instrucciones página 5

REF. 60044
EN
INSTRUCTION MANUAL
PRODUCT'S PRESENTATION
This tool has been designed to tighten and loosen lug nuts
and screws which requires a high torque.
It is equipped with a work LED light and a rotation selector
which also allows you to
lock off the trigger and prevent an accidental starting of the
tool.
It has 5 different gears, 3 for tightening and 2 for loosening,
allowing a speed adjustment according to operation to be
carried out.
Also, it has an ergonomic handle for an improved grip and
precision.
SAFETY INSTRUCTIONS
WARNING!
READ, UNDERSTAND
INSTRUCTIONS
OPERATING THIS TOOL. FAILURE TO DO SO MAY
RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
Workplace security
Keep the area clean and well lit. Cluttered or dark areas can
cause accidents.
Do not use power tools in explosive environments (for example
in the presence of flammable
liquids, gases or dust). Power tools create sparks which may
ignite flammable elements.
Keep children and people away during the use of the tool.
Distractions can cause you to
lose control of the tool.
ElectriZcal safety
Do not expose power tools to rain. The penetration of water
into the tool increases the risk of electric shock
AND FOLLOW ALL
AND WARNINGS BEFORE
Personal safety
Do not use a tool when you are tired or under the influence of
drugs, alcohol or medication. A moment of distraction while
using a tool can cause serious personal injury
Use safety equipment.
Avoid accidental starting. Make sure that the trigger lock
is set in its correct position before inserting the battery or
transporting the tool. Carrying tools with your finger on the
Always wear eye protection.
Wear ear protection.
trigger can cause accidents.
Remove any adjusting key before turning the tool on.
Do not rush. Always maintain proper footing. This allows better
control of the tool in unexpected situations.
Dress appropriately. Do not wear loose clothing or jewelry,
they could get caught in the moving parts of the tool.
Using the tool
Do not force the tool.
Use the right tool to the work you need to do.
Do not use the tool if the trigger does not work correctly.
Do not use any other charger than the one specified by
the manufacturer. A charger can cause fire if it is used with
unsuitable batteries.
Do not use the tool with batteries other than those specified
by the manufacturer. The use of any other type of battery may
cause fire.
If the batteries are not used, keep them away from other
metal objects such as coins,
keys, nails, screws or other small objects that can lead to a
connection from one terminal to another.
If the battery is bad condition, it can eject liquid. Avoid any
contact with the liquid, it can cause irritation or burns. In case
of accidental contact, flush with water. If the fluid comes into
contact with eyes seek medical assistance.
TECHNICAL SPECIFICATIONS
Square dimensions: 1/2"
Rated speed: 1000/1350/1600 RPM
Impact frequency: 1000/1600/2000 IPM
Maximum torque: 650/800/1200NM
Power: 1000W
Voltage: 20V
Brushless motor: Yes
Number of gears:
Tighten: 3
Loosen: 2
Weight: 2,8kg
· 5 ·