Collomix Xo 1 R Manual De Servicio página 11

Care and maintenance
 Before you carry out any operations on the machine,
and especially when changing the mixing tool, always
pull out the power plug out first.
Clean the machine and the mixing tool immediately after
use. We recommend that you use the Collomix MIXER
CLEAN cleaning bucket for cleaning.
Keep the HEXAFIX coupling clean
and freely moving at all times.
Take the mixing tool out of the
Fett
coupling after you have finished
Grease
your work.
Graisse
Grease the hexagon mount of the
Smar
coupling at regular intervals with
suitable grease.
Keep the ventilation slits clean and clear at all times
so that the machine can be properly cooled. Blocked
ventilation slits will lead to irreparable damage to the
machine.
Make sure that the ON/OFF switch moves and releases
smoothly at all times.
The machine is equipped with self-deactivating carbon
brushes. This means that the machine will shut itself
down once a certain level of wear is reached. The carbon
brushes can be replaced by the authorized customer
service center or by the Collomix Service center.
Have repairs carried out only by an approved workshop
or by your Collomix Service.
Only use original Collomix accessories and replacement
parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
http://www.collomix.com
Disposal
The device, accessories and packaging should all be
consigned for environment-friendly recycling.
Electrical tools which have come to the end of their
service lives must be made unusable by removing the
mains power cable.
For EU countries only:
Do not dispose of electrical tools with
household waste.
In accordance with EU Directive 2002/96/EC
concerned with used electrical and electronic
equipment and the incorporation of the
requirements of the directive in national
legislation, unusable electrical equipment must be
collected separately and consigned for environment-
friendly recycling.
Warranty
The manufacturer provides a warranty within the
framework of his terms and conditions of delivery in
accordance with the requirements of statutory/country-
specific provisions. Should you need to make a claim
under the warranty, please provide us with your invoice
or delivery note.
On no account will any warranty claims be accepted if
any repairs are carried out by third parties. In the event
of any irregularities, please send the machine to us.
Complaints can only be accepted if the device is sent to
the Collomix Service center undismantled.
The warranty does not apply to damages caused
by normal wear, overloading, improper handling,
unsuitable accessories or inadequate maintenance.
Any structural or functional modifications to the
machine which are made without our agreement shall
render the warranty and the Declaration of Conformity
null and void.
Subject to change.
Manufacturer:
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
Germany
EN