George Foreman MCAFD900D Manual De Instrucciones página 13

Idiomas disponibles

HOW TO ROAST

1. Plug in the appliance.

2. Place the cooking pot in the unit and add ingredients to the pot.

3. To select the ROAST function, use the up and down arrows until ROAST is

highlighted and press START/ENTER. Setting will stop flashing and turn solid.

4. Once the function is selected, the temperature will flash (default temperature

is 375°F / 190°C) on the display. You can use the up/down arrows to change

temperature. Press START/ENTER.

5. Once the temperature is selected, time will flash (default time is 20 minutes). You

can push the up/down arrows to adjust the time. Press START/ENTER and the

display will stop flashing.

6. When the cooking cycle has been started, the 8 circular LED lights around the

time/temp display will start to illuminate. Each LED represents 1/8th of the time

remaining in the cycle. As each time segment is passed, the corresponding LED

will stop flashing. At the end of the cooking cycle, the circle will be completely

illuminated.

7. After the cooking cycle is complete, the unit will beep. The current cooking function

will start flashing and the display will read "End" for 5 minutes. If the unit is not

touched, it will automatically go into sleep mode.

NOTE: Press START/ENTER to change time or temperature during the cooking cycle.

Display will flash for 1 second and then return to solid. During cooking, you can open the

hood to check on or flip your food. The timer will pause when the hood is opened and

then automatically resume after it is closed.

8. Once cycle is done you can remove the food and transfer to a serving plate. You can

also fully remove the cooking pot with oven mitts.

9. Keep the hood open after removing your food so the unit will cool down more

quickly. If you need to cook your food longer, simply press the up arrow while time

remains on the cooking cycle, then press the START/ENTER button.

NOTE: If batch cooking, empty the oil from the removable cooking pot after every 2

batches. This will help prevent grease from burning and causing smoke.

MCAFD900D_29203_ES_IB_A.indd 13

7/14/22 8:51 AM