George Foreman MCAFD900D Manual De Instrucciones página 15

Idiomas disponibles

HOW TO KEEP WARM

1. Plug in the appliance.

2. Place the cooking pot in the unit and add ingredients to the pot.

3. To select the KEEP WARM function, use the up and down arrows until KEEP WARM

is highlighted and press START/ENTER. Setting will stop flashing and turn solid.

4. Once the function is selected, the time interval will flash (default interval is 15

minutes) on the display. You can use the up/down arrows to change the time

interval. The time can be set up to 4 hours. The display will count up from (0:00) to

(4:00). Press START/ENTER and the display will stop flashing.

NOTE: The temperature cannot be set or adjusted in the KEEP WARM function.

5. When the warming cycle has been started, the 8 circular LED lights around the

time/temp display will start to illuminate. Each LED represents 1/8th of the time

remaining in the cycle. As each time segment is passed, the corresponding LED

will stop flashing. At the end of the warming cycle, the circle will be completely

illuminated.

6. After the warming cycle is complete, the unit will beep. The current cooking function

will start flashing and the display will read "End" for 5 minutes. If the unit is not

touched, it will automatically go into sleep mode.

NOTE: Press START/ENTER to change time during the warming cycle. Display will

flash for 1 second and then return to solid. During warming, you can open the hood

to check on or flip your food. The timer will pause when the hood is opened and then

automatically resume after it is closed.

7. Once cycle is done you can remove the food and transfer to a serving plate. You can

also fully remove the cooking pot with oven mitts.

8. Keep the hood open after removing your food so the unit will cool down more

quickly. If you need to cook your food longer, simply press the up arrow while time

remains on the cooking cycle, then press the START/ENTER button.

NOTE: If batch cooking, empty the oil from the removable cooking pot after every 2

batches. This will help prevent grease from burning and causing smoke.

MCAFD900D_29203_ES_IB_A.indd 15

7/14/22 8:51 AM