Using the wireless headphones
1. Answering and ending a call
• When there is an incoming call, you will hear a ring and the LED blinks blue.
• Press the multifunction button to pick it up. You may also press the answer
button on your smartphone to take the call.
• To end a call, simply press the multifunction button. Likewise, you may also finish
the call directly using the end key on your smartphone.
• To reject or ignore an incoming call, press and hold the multifunction button.
• If you want to redial the last number called, press the multifunction button twice.
2. Music playback
• Briefly press the multifunction button
• Press briefly the – and + buttons to go to the previous or next.
• Press and hold the + and – buttons to increase or decrease the volume level on
the headphones.
• When listening to music using your smartphone, playback will pause to allow the
call to go through.
• As soon as you hang up, music playback will resume automatically.
to reproduce and stop audio playback.
V. Troubleshooting
Problem
The device is not
The battery level might be low. Please recharge the
turning on
battery.
Batteries are not
Check that the source device is ON, or adaptor is
being charged
correctly used. Check that the Micro-USB cable is
securely connected.
The device is not
Place the wireless headphones and Bluetooth
pairing
more than three feet away from each other.
The device can't
Confirm that the headphones are under pairing mode.
connect to the
Confirm that the Bluetooth
mode
source device. Input code "0000" when requested.
Bluetooth
®
There is no sound
Confirm that the connection with the Bluetooth
when playing music
set for profile A2DP. Confirm that volume controls on
both, the wireless headphones and the source device are
set to the appropriate levels.
Sound is distorted
Check that no other devices using the 2.4GHz
when playing music
wavelength are nearby, and that there are no obstacles
blocking the signal path.
Solution
device not
®
function is turned on in your
®
device is
®