Publicidad
Idiomas disponibles
Idiomas disponibles
To enable the pairing mode, press and hold the Up arrow and Stop
button simultaneously located on the controller for 10 seconds.
The red and blue LEDs will light up at the same time to indicate
that the device has entered into the pairing mode.
To make pairing easier, make sure you enable the Bluetooth feature
on your phone. Select Add Device and then click the blue + sign. If
the device is not automatically recognized, select the Blind controller
icon from the list and go to the next step.
Then, choose the Bluetooth® option in the upper right corner and
follow the indicated steps.
Step 1
Step 2
Step 3
You must connect to a 2.4GHz Wi-Fi network. Enter your network
password. Make sure you enter the correct credentials, otherwise
the device will not connect.
To add the device may take around 30 seconds, depending on the
speed of the Wi-Fi connection.
NOTE:
To restore the device to factory settings, press and hold the Up and
Down arrows for 8 seconds until the LEDs ash rapidly.
Publicidad
