KLASS Fan P3 Serie Manual De Instrucciones página 6

Installation of 3 Blades:
Locate the marks to install 3 blades on the
motor board.
Place the three blades without tightening them
to the end at this point.
Once the three blades are installed, adjust
them so that the space between the blades is
minimal.
Now, tighten the screws to the maximum.
ATTENTION!
Be careful when assembling the parts, only one unassembled
item can slightly unbalance the fan. Please do not forget a single element,
screws, washers.
Plastic and cardboard packaging can be recycled. Separate and dispose of each
material in the appropriate recycling container. Consult your local authorities for
more information on recycling.
Screws
Blades
4
Installation
Mark "3"