NORAUTO J30 Manual De Instrucciones página 10

EN
TECHNICAL DATA
Designation:
Min. support height:
INTENDED USE
This product is an axle stand for supporting motor vehicles. It is purely a support device. Using
the device for other purposes is not permitted. Liability for all damages/injuries caused by
improper use shall be borne by the user of the device, and not by the manufacturer/dealer.
USE
1 For your safety, read the instruction
manual before first use.
2 Insert the saddle completely into
the axle stand and lock it in place
by turning the lever.
3 Wedge the remaining wheels firmly
before lifting the vehicle.
4 Lift the lever and simultaneously
adjust the saddle to the desired
height.
5 Then lower the lever and lock
the safety lock in the teeth of the
saddle.
6 Insert the locking pin into the frame.
WARNINGS
1 Read this instruction manual in its entirety and keep it for future reference.
2 The vehicle must be secured to prevent it from rolling away.
3 Immediately support the lifted load with the axle stand.
4 The axle stands must be tested for full functionality before each use. After the test, if you
are not sure whether they are functional or if you found signs of damage, the axle stands
must not be used.
5 Do not use damaged axle stands.
6 Do not use on slopes.
7 Never exceed the stated carrying capacity of 3 t. Overloading can damage the axle stands
or impair their functionality, thereby jeopardizing your safety!
8 Place the load in the centre of the saddle.
9 Making modifications will void the warranty and endanger the safety of the user.
10 Only lift your vehicle in areas recommended by the vehicle manufacturer.
11 Use only on a hard and firm floor and surface.
12 Do not use more than one pair of axle stands.
9
INSTRUCTION MANUAL
Rack and pinions rated load : max. 3 tonnes
276 mm, Max. support height: 420 mm, Net weight: 6.4 kg/pair