User Registration; Download And Install App - INVENTOR EP3-WiFi16L Manual De Usuario

Please follow this addendum
For setup and use of Wireless product
CD040IU-APWIFIDF6(OEM)
16120100A08130
USER MANUAL OF APP
Caution: in order to download the APP QR Code
A and QR Code B are required.
1 Precaution
1. Applicable platforms: IOS, ANDROID.
Due to random occurring events, please
notice:
2. This APP has been updated and supports the
latest versions of Android & IOS operating
systems.
3. Concerning wireless safety, unit supports:
WPA-PSK/WPA2-PSK encryption and also no
encryption. However, WPA-PSK/WPA2-PSK is
recommended. Please check Service Website
for detailed information.
4. The smartphone's camera should be at least
5mb in order to properly scan the QR code.
5. Due to connectivity traffic and interference the
connection request may time out, In this case
re-run network configuration.
6. Due to dynamic network connectivity this
process may time out. In this event, keep
in mind that the Smart App and product
may display conflicting settings information.
Reconnect to Sync.
NOTE: We take no responsibility for any issues
caused by Internet, Wireless Router and devices.
Please contact provider for extra help.

2 Download and Install APP

• Android Users: scan QR Code A or go to google
play, search "Invmate II" app and download.
• Iphone Users: scan QR Code B or go to App
Store, search "Invmate II" app and download.

3 User Registration

Caution: Please ensure your mobile device is
connected to a wireless router.
Note, the wireless router must have Internet
connection, before user registration and network
configuration can take place.
08:42 08:42 65%
LOGO LOGO
Username Username
Password Password
Sign in Sign in
Creat Accout Creat Accout
Forgot password? Forgot password?
[1]
1. Click "Create Account"
2. Enter email address and password , then click
"Registration"
4 How to configure Networks
Caution: It is necessary all other network
connections to be ignored, and connect only to
the wireless network you desire to configure.
Notice the ANDROID and IOS device's Wireless
setting should be enabled,and automatically
connect to its original Wireless network.
1. Connecting with an Android device
1.1 Mobile device needs to be connected to the
desired wireless network. All, other networks
should be ignored since these may influence
the configuration process.
1.2 Press Power button to turn off the
dehumidifier then press and hold the Ion
button for 3 seconds to activate the AP
mode.
1.3 Press "+ Add Device"
1.4 Scan QR Code, which is attached with unit
20:14 20:14
65%
Sign up Sign up
Enter your E-mail address Enter your E-mail address
Password Password
Registration Registration
I have read and agree to the terms of service I have read and agree to the terms of service
61% 61%
[2]