Publicidad
Idiomas disponibles
Idiomas disponibles
5 CLEANING AND MAINTENANCE
5.1 The front and back of shower room are high-quality tempered glass, don't impact it please.
5.2 Daily cleaning should be done with common cleanser and soft cloth. Please keep away the
corrodible chemical products such as acetone or ammonia.
5.3 Dirty spot can be cleaned with toothpaste and soft cloth according to its property. Water scale
can be cleaned with cleanser of weak acid.
5.4 Open the glass door after cleaning to make the water dry naturally.
6 TROUBLES SHOOTING
Before attempting to diagnose any fault, make sure that the electricity supply is power off.
Trouble
No shower or
shower weak
Electroplate
goes moldy
Big noise
Pump doesn't
start
Cause
The water pressure is
abnormal.
Switch is not connected well
The flow pipe is broken
Filter of hot and cold switch
jammed
Chemical cause, such as
gas, glue
Stuffiness and humidity
change
There is malfunction in
pump
Screw for pump too loose or
too tight
There is deck on pump
No power input or Low
Voltage
Motor is defective
25
Check the water pressure in flow
Check the switch and connect well
Change the pipe
Change it and keep away from
Keep dryness and ventilation
Change the pump
Adjust the screw
Check the pump, keep the deck
away from pump
Check circuitry
Disposal
pipe
Clean the filter
chemical
Replace pump
Publicidad
