Publicidad
Idiomas disponibles
Idiomas disponibles
5.2
Cams setting
The actuator stops on open or closed position when corresponding travel limit
switch is tripped by its cam.
How to adjust cams for both directions
1. Drive the valve to the clockwise travel limit position.
As a standard, it is CLOSED position.
2. Set the cam corresponding to clockwise travel limit switch
(1).
3. Drive the output slightly in the counter-clockwise direction
using manual override.
4. Set the cam corresponding to clockwise signaling switch (2).
5. Drive the actuator to the counter-clockwise travel limit
position.
6. Redo settings steps 2 to 4 for counter-clockwise direction.
7. Perform complete valve counter-clockwise and clockwise
electrical operations.
The motor should stop when the corresponding cams are
reached.
6
POSITION INDICATOR SETTINGS
6.1
Handling position indication
Position indication can indicate travels
from 90°to 300°. Angle sector (gray
arrow) is marked out by 2 markers hold
on 2 rotating rings: (2a) red tagged "C"
(CLOSED) and (2b) green marker
tagged "O" (OPEN).
Position indicator (1) features a slit on
his side to indicate the current position
between CLOSED and OPEN positions.
It can be turned to be better viewed in
operation using flat blade screwdriver
shape on its top. The angle sector can
follow and be set according to position
indicator.
18
Publicidad
