Publicidad
Idiomas disponibles
Idiomas disponibles
1
SAFETY
This device complies with current applicable safety standards.
Installation, maintenance, and use of this unit require a skilled and trained
staff.
Please carefully read this whole document before mounting and starting-up
the actuator.
2
PACKAGING, STORAGE AND MAINTENANCE
2.1
Packaging
AQ actuators packaging is comprised of a dual-layer carton strapped on a pallet.
For certain non-EU countries or on request, the pallets are heat treated to
standard NIMP 15 and IPPC-stamped.
This packaging is identical for shipping by road, air or sea, unless otherwise
provided in the contract.
2.1.1
Check identification sticker
Information on the nameplate sticker on the side of the actuator should match
those on your order.
QR Code on this sticker can be used to identify the actuator.
2.2
Storage
Actuators should be stored under a shelter, in a clean and dry place and at a
stable ambient temperature.
•
Avoid placing the actuator directly on the floor
•
Check that plugs of cable entries are correctly tightened.
•
Check that cover screws are correctly tightened to ensure weatherproof
sealing of the cover.
AQ actuators include electrical components and lubricated gear stages. Even
with a weatherproof enclosure, oxidation, seizing and other alterations may
occur if actuator is not correctly stored.
Heating resistor should be connected to power supply especially if the storage
place is located outdoors.
8
Publicidad
