Battery Tool Use And Care; Service; Safety Of Others; Speciic Safety - SKF TLGB 20 Instrucciones De Uso

Battery tool use and care

• Recharge only with the battery charger
speciied by the manufacturer
A charger that is suitable for one type of
battery pack may create a risk of ire when
used with another battery pack
• Use power tools only with speciically
designated battery packs Use of any other
battery packs may create risk of injury
and ire
• When battery pack is not in use, keep it
away from other metal objects, like paper
clips, coins, keys, nails, screws or other
small metal objects, that can make a
connection from one terminal to another
Shorting the battery terminals together
may cause burns or a ire
• Under abusive conditions, liquid may be
ejected from the battery; avoid contact
Liquid ejected from battery may cause
irritation or burns If contact acciden-tally
occurs, lush with water If liquid contacts
eyes, seek medical help Liquid ejected
from the battery may cause irritation
or burns

Service

• Have your power tool serviced by a
qualiied repair person using only identical
replacement parts This will ensure that
the safety of the power tool is maintained

Safety of others

This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety
Children should be supervised to ensure
that they do not play with the appliance

Speciic safety

Use only SKF TLGB 20-3 high pressure hose
900 mm (36 in.) with coupler Grease
injection injuries are a very serious injury
Hold the hose only in the area of the spring
guard Avoid accidental starting Be sure
switch is not pressed when inserting
battery pack
Replace the hose at the irst sign of wear,
kink or damage to the outside jacket Do not
bend the hose so that it becomes kinked
Do not overreach Keep proper footing
and balance at all times Proper footing and
balance enable better control of the tool in
unexpected situations
Use safety equipment Always wear eye
protection
Dust mask, non-skid safety shoes, hard
hat or hearing protection must be used for
appropriate conditions
The gun uses lubricants, that may be
lammable and poisonous if ingested Do not
use gun near open lame or other ire
hazards Do not use lammable greases with
this grease gun
Grease is often marketed as high
temperature because it must maintain its
lubricating properties in hot areas, but the
lubricant may be lammable if the
temperature is too high Please read all
warnings on lubricants before using this
gun
Do not use lammable greases with this
grease gun
4
WARNING

Do not use any hose that has not been
approved by SKF Extreme pressure may
cause nozzle extension or whip hose to burst
Replace hose at irst sign of wear, kinks, or
damage to outside jacket
Follow whip hose instructions and
warnings Failure to comply may result in
serious injury or death
DANGER

Grease gun can develop high pressure up to
700 bar (10 000 psi) Use safety glasses and
gloves for protection during operation Keep
hands clear of exposed rubber portion of
hose
Failure to comply may result in serious
injury and/or death

Residual risks

Additional residual risks may arise when
using the tool which may not be included in
the enclosed safety warnings These risks
can arise from misuse, prolonged use etc
Even with the application of the relevant
safety regulations and the implementation
of safety devices, certain residual risks can
not be avoided
These include:
• Injuries caused by touching any rotating/
moving parts
• Injuries caused when changing any parts,
accessories
• Injuries caused by prolonged use of a tool
When using any tool for prolonged periods
ensure you take regular breaks
• Impairment of hearing
• Health hazards caused by breathing dust
developed when using your tool (example:
-working with wood, especially oak, beech
and MDF )