Ruby BERO 3 Manual De Instrucciones página 43

Fan speed levels (increasing):
Level 1
Level 2
Level 3
Level 4
Level 5
7. Under working condition, press Warmer or Cooler button to set
the target temperature you want, you could set from 4 -32º degree C
(The default temperature is 32º degree C).
8. Timer function:
Timer ON: under standby condition, press Timer button to set the hours
you want the unit on from 1 - 24 hours, press Timer button again after
it shows 24 on the display then you will see "00" which means the
timer setting is cancelled. Wait 5 seconds after you set the desired
hours you want to save the setting ( It will cancel the timer if you press
Power button after you set the Timer function and unit will be turned
on directly).
Timer OFF: under working condition, press Timer button to set the
hours you want the unit off from 1 - 24 hours, press Timer button again
after it shows 24 on the display then you will see "00" which means
the timer setting is cancelled. Wait 5 seconds after you set the desired
hours you want to save the setting ( It will cancel the timer if you press
Power button after you set the Timer function and unit will be turned off
directly).
9. Child-lock function: you could only use this function by the
button on the remote control, there is no Child-lock button on the unit.
The Child-lock indicator on the display will turn on after you activate
this function and unit will keep the settings before you set Child-lock
function, you could not proceed any operation before you unlock the
unit by the remote control.
Note: Child-Lock function will be relieved automatically if the power off
during using process.
43