YATO YT-67470 Manual De Instrucciones página 9

EN
MAINTENANCE AND INSPECTIONS
After fi nishing work, the construction compound should be removed before it is concentrated. Dried construction compound can be
diffi cult or impossible to remove. Dried construction compound can damage the tool. Do not use solvents, alcohols, acids, petrol
or abrasives to remove the compound.
Dispose of the compound before drying according to the instructions of the mass manufacturer. Do not use sharp objects and wire
brushes to clean the inside of the housing and the nozzle.
Having fi nished your work, clean the housing, the vents, all switches, handles and guards with compressed air (at 0.3 MPa max-
imum), a brush or a dry cloth. Do not use any chemicals or cleaners. Clean the tools and handles with a clean, dry cloth. Do not
immerse the tool in water or other liquid.
Used tools are recyclable materials so they cannot be put into household waste containers as they contain substances danger-
ous to human health and the environment! Please actively help us in using the natural resources responsibly and protecting the
environment by handing over the used tool to a used tool storage point. In order to reduce the amount of disposed waste, it is
necessary to reuse or recycle it in another form.
O R I G I N A L I N S T R U C T I O N S
9