Costway OP70367 Manual Del Usuario página 18

EN
1. Assemble arm C1 on the wall
bracket A1's arm holes.
2. Tighten the arm screws.
3. Assemble arm C2 on the wall
bracket A2's arm holes.
4. Tighten the arm screws.
M
K
5. Screw two plastic washers (M) into
the arm-bar links (K)
6. Installation notes：Push C1 arms slightly
in the direction of the fold and hold it. Move
K to suitable position, and make sure the K
and the hole on the arm in the same vertical
line. Then insert the arm-bar links to the
K
holes on the end of both arms.
7.Tighten the two screws and nuts with a wrench.
(Installation notes: Do not fully tighten the screw nuts, leaving about 0.4cm space in
between.)
18