Costway OP70367 Manual Del Usuario página 22

EN
C2
a
22
Step3: Don't forget to tighten the screws(1&2) after
adjusting the inclination of the awning.
If you don't tighten the screws(1&2), the screw 3 will be
damaged soon.
Step1: Hold up the arm and loosen the screws(1&2). Don't
loosen the screws directly without holding the arm up.
Step2: Keep holding up the arm(C2) by your hand and
adjust the screw(3).
If you turn the screw in the direction of arrow a, the angle
of the awning will go down.
If you turn the screw in the direction of arrow b, the angle
of the awning will rise upward.
3
After adjusting the screw3, please check if the awning
has been adjusted to the proper angle, if not, please
b
repeat the above installation steps 2 until the angle is
suitable.
Step3: Don't forget to tighten the screws(1&2) after
adjusting the inclination of the awning.
If you don't tighten the screws(1&2), the screw 3 will be
damaged soon.