Publicidad
Idiomas disponibles
Idiomas disponibles
Compressed air line
To ensure that the air ratchet wrench is used in a safe way, to
make it easier to change attachments, to optimise the operation
of the appliance and to extend its service life, certain
precautions and procedures must be considered such as:
▪ The air pressure supplying the appliance must not exceed the
maximum pressure given in the technical specifications;
▪ The compressed air system must have a filter capable of
regulating the working pressure, eliminating liquid and solid
particles and lubricating the appliance. This keeps the
appliance lubricated and reduces friction;
▪ Drain the pressure regulator cup daily. The presence of water
in the compressed air system can cause damage to the
appliance mechanism;
▪ The compressed air line shall be composed of a 3/8"
diameter hose;
▪ Never use a compressed air hose for pulling, transporting the
pneumatic tool. Damaged hoses increase the risk of
accidents and injuries;
▪ Keep the air hose away from heat sources, oil, sharp objects
and rotating parts. If the air hose is damaged, it should be
replaced;
▪ Constantly check the condition of air hoses and couplings to
detect and prevent air leaks;
▪ To ease cleaning, adjustment, changing of attachments,
servicing or maintenance, the air hose should be connected
to a shutoff valve to shut off the compressed air supply to
the appliance.
24
Maintenance and cleaning
Disconnect the tool from the compressed air system
before performing any type of cleaning, adjustment,
change of attachments, repair or maintenance.
Cleaning:
Always keep the air ratchet wrench clean and dry. Clean all air
ratchet wrench's components and accessories after operation.
Always keep air ratchet wrench free from oils, lubricants or
grease.
Do not use aggressive cleaning products. These products may
damage plastics and metals, compromising the safe operation
of the pneumatic tool.
Maintenance:
Replace worn out or damaged parts immediately, so that the
pneumatic tool is always in a safe operating condition.
Keep all bolts well tightened in order to ensure a safe operation.
Only maintenance works described in this instruction manual
may be carried out; all other works must be performed by an
official dealer.
Use only VITO-approved tools and attachable accessories for
this appliance or technically identical parts. Failure to do so may
result in personal injuries or damages to the air ratchet wrench.
If in doubt, if you lack knowledge or resources, you should
contact an official distributor.
Technical assistance
The air ratchet wrench should only be serviced by the brand's
technical assistance center, or other qualified personnel,
replacing any necessary parts with original ones.
Publicidad
