Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
Connection to the compressed air line
1. Remove the plastic cap from the compressed air inlet;
2. Insert and tighten the air hose coupling (3) into the air inlet;
3. Attach the coupling to the air hose.
Drive sockets
Never insert or change the drive sockets while the
appliance is running. Always disconnect the appliance
from the compressed air supply before doing this.
1. Fit the drive sockets, making sure it is properly fixed;
2. To remove, pull out the drive socket.
OPERATING INSTRUCTIONS
Start and stop
Check the working pressure and adjust in accordance with
the technical data (Pmax < 6.3 bar).
1. To switch the pneumatic tool on, press the "ON/OFF" switch
(4);
2. To switch off, release the "ON/OFF" switch.
Direction of rotation
Do not change the direction of rotation while the air
ratchet wrench is running, it can cause serious damage to
the appliance. Always check the direction of rotation before you
start operating it.
1. To select the direction of rotation, use the forward/reverse
lever (1).
▪ For clockwise rotation, set the lever to the (F) position;
▪ For counter clockwise rotation, set the lever to the (R)
position.
25
Publicidad
