Stealth Products UniLink Manual De Usuario página 9

135° Bracket Installation (BAXX Active)
2. Position the lateral on the inside of the back support and place the Lateral Track
Nut (D) in the slots on the 135° Bracket.
3. Insert the M6 x 1.0 x 14mm Button Head Screws (B) through M6 Washers (C)
and into the Lateral Track Nut (D).
4. Tighten the screws to secure the lateral in the desired position on the back
support.
Pad Mount Installation
1. Place the conical socket of the Pad Mount (A) onto the conical mount of the
1.5" Link (B).
2. Place the 1.5" Coupler
(C) onto the 1.5" Link
(B) as shown below and
secure it with an M5 x
0.8 x 25mm Socket
Head Screw and M5
Flat Washer.
3. Adjust the angle of the
Pad Mount and tighten
the M5 x 0.8 x 25mm
Socket Head Screw.
EN
1. Attach the 135° Bracket to the lateral using the
included M6 x 1.0 x 10mm button head screws (A).
D
A
A
B
Installation
C
B
C
4