Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE:
-Do not remove or insert the memory card while the Car DVR is
turned on as this may damage the memory card or corrupt the
memory cards stored data.
-Please use a Class 10 or higher rated micro SD card with a
maximum capacity of 32GB.
-Please format the Micro SD card before the initial use.
-When removing the memory card,be careful as the card may
eject quickly.
To remove the memory card
Ensure that the Car DVR is powered off,then push the memory
card until a click is heard and then release the card to eject .
3.2 Installing the Car DVR
1. Turn off the car engine and turn off the dash cam.
2. Insert the high-speed TF card (Class10 or above) into the card
slot of the dash cam. (You need to format the TF card in the dash
cam when you use it for the first time)
3.Remove the protective stickers from the Car DVR and the
Suction Mount.
4.Slot the mount bracket into the socket on the top of the Car
DVR and with the screen facing you,slide the bracket from left to
right until the bracket locks in place.
5.Fix the recorder on the original rear view mirror position of the
car.
6.Once the Car DVR is securely installed on your vehicle's
windscreen,plug the car charger into the car cigarette lighter, and
the other end into the USB port of the dash cam. (The charging
extension cable can be laid along the edge of the car windshield
when wiring.)
7. Install the rear camera by plugging into the dash cam interface
5
Publicidad
