Publicidad
Idiomas disponibles
Idiomas disponibles
7. CHECK FOR A CORRECT FUNCTIONING
1.
Appliance plugged in.
2.
temperature value for foods. . Appliance not exposed to the direct light of the sun or to high powered lamps (COLD only).
5. The room temperature does not exceed that in which the appliance is designed to work normally, i.e. +30°C 55% r.h.
(climatic class 4) (COLD only).
air (COLD only).
8. CLEANING THE FILTER
1.
Switch off the appliance, by operating the socket protection switch, and remove the plug from the socket. . Slide a hand
into the lower right hand side of the appliance and grasp the filter.
4.
Clean the filter, removing all dust formed on it. . Insert the filter into the relevant guides and replace everything in reverse
order (see picture 5).
9. INTERNAL CLEANING
COLD Models: . Switch off the electrical supply as described in Chapter 8. . Remove the goods and store in a suitably
1
refrigerated place.
3.
Wipe the sides with a sponge dipped in water and sodium bicarbonate. Dry with care. . Switch on the
electrical supply.
DRY Models: 1. Switch off the electrical supply as in Chapter 8.
WATER 3
. . Dry with care using a soft clean cloth. . Switch on the electrical supply.
10. REPLACEMENT OF THE HEATING ELEMENT
1.
Wait for the heated elements to cool down. . Switch off the electrical supply as in Chapter 8. . Remove the fixing screws
from the protection grid. . Remove the protection grid.
4
heating element in such a way as to give access to the fast-on connections.
connectors and replace with a new one.
DISPOSAL OF YOUR OLD PRODUCT
Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the
Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical
electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household
waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and
human health.
0/I switch is switched on with the green light lit up. . The thermometer has to show a suitable
4
6.
There are no hindrances in front of the motor compartment, to ensure an adequate flow of
COLD Models
5
4
2
8.
Replace everything in reverse order (See picture 6).
3
3.
Remove the filter, by pulling it out towards youself.
2
2.
Clean the tub with a soft, damp sponge.
DRY Models
5.
Remove the fixing screws from the heating element.
7.
Remove the heating element from the fast-on
10
2
4
DO NOT USE
3
6.
Remove the
European
and
Publicidad
