Descargar Imprimir esta página

CONGA 2290 ULTRA T Manual De Instrucciones página 24

Robot aspirador

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
ENGLISH
and the power button will light up If the light flashes orange, it means the battery is not
completely charged. To ensure the longest cleaning time, wait until the light is steady blue.
This will indicate the battery is fully charged and the robot is ready to be used. Fig. 24
3. OPERATION
Start cleaning
-
Hold down the power button on the robot to turn the robot on.
-
Press the power button on the robot or on the remote control to start cleaning.
Note
If the robot runs out of battery during cleaning, it will automatically return to the charging
base. Once the battery is fully charged, the robot can start a new cleaning cycle.
Warning
If there is no good access to the charging base, the robot will not be able to return to its charging
position. In that case, once the robot has stopped, take it manually to the charging base.
Pause
-
Press the power button on the robot or on the remote control to pause the cleaning process.
-
Press the power button on the robot or on the remote control to resume the cleaning
process. Fig. 25
Return to the charging base
Press the back home button on the robot or on the remote control in order to send the robot
to the charging base.
Turn off
Hold down the power button to turn the robot off. Fig. 26
Warning
The robot vacuum cleaner has a power switch located on its main body. If the robot is
not going to be used for long periods of time, it is suggested to switch it off. If the robot is
switched off, it will restore factory default settings as a safety measure. To use the time
setting function, the switch must be in On position. Otherwise, you will have to reset it using
the remote control or the App.
Cleaning modes
This robot includes different modes and different functions that can be activated from the
remote control or the App.
Automatic mode
46
CONGA 2290 ULTRA T
-
Press the power button for the robot to start Auto cleaning mode.
-
The robot will clean the whole surface, edges, around objects such as tables, chairs etc.
Once it starts running out of battery, it will return to the charging base. Fig. 27
Intense scrubbing mode
-
Attach the mop cloth to the water tank and fill the tank with water.
-
Take the dust tank out.
-
Install the water tank in the robot and turn it on. Fig. 28
-
Use the remote control to select the desired scrubbing power level: High, Medium or Low.
-
Once the scrubbing mode is selected from the remote control or the App, the device will
perform the function "All in One" to vacuum, mop and scrub at the same time thanks to its
mixed tank.
Note
-
If you want to sweep the floor, skip the water-filling step.
-
To ensure perfect scrubbing from the start, it is suggested to dampen the mop cloth
evenly with water before use.
Spiral mode
-
The robot will carry out an intense cleaning of a specific area when this mode is
activated. The robot will start cleaning at a specific point and will move outwards
performing spiral movements (1 metre). Then, it will return to the starting point in spiral
movements again.
-
Before operating the robot with spot cleaning mode, place it on the spot to be cleaned.
-
Press the spot cleaning button on the remote control or on the App. Fig. 29
Edge mode
-
When this mode is selected, the robot will clean along walls and around furniture (table
or chair legs, for example).
-
Press the edge cleaning button on the remote control or on the App. Fig. 30
Room mode
-
When this mode is selected, the robot will clean in Automatic mood and then it will get
back to the starting point.
-
Press the room cleaning button on the remote control or on the App. Fig. 31
-
To ensure an efficient cleaning of the room, close the door or use the magnetic strip to
delimit the cleaning area.
Suction power level function
Press the power level button on the remote control or on the App in order to control the
robot's suction power during the cleaning process. There are 3 suction power levels: Turbo,
ENGLISH
CONGA 2290 ULTRA T
47

Publicidad

loading

Este manual también es adecuado para:

05734