Descargar Imprimir esta página

Panasonic EY74A2 Manual De Instrucciones página 12

Destornillador y taladro sin cables/ destornillador y taladro percutor sin cables
Ocultar thumbs Ver también para EY74A2:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
41) If an unusual sound, odour or amount
EN
of heat is produced by the charger
during charging, remove the power
plug from the socket immediately,
disconnect the battery pack, and
request inspection and repair from the
place of purchase.
42) Inspect the charger periodically to
check whether dust has gathered in
the vents and that the cooling fan
rotates during charging. Continued
charging without ensuring good
cooling may result in the production of
smoke, ignition and explosion.
43) Do not use or charge in a location with
flammable liquids or gases.
• This may result in the generation of
heat, smoke, ignition or explosion.
44) Do not remove the power plug from
the socket with wet hands.
• This may result in electric shock.
45) Remove power plug from socket when
not in use.
• Failure to do so may result in electric
shock or short circuit and fire due to
poor insulation.
46) Use an appropriate power socket for
the power plug.
47) Do not modify the power plug.
48) Hold the device steady and avoid
waving it around during use.
Failure to do so may result in injury.
49) Securely affix in place the work piece
to be processed.
Failure to do so may cause unintend-
ed movement of the work piece
resulting in injury.
For safety, use a securing tool such
as a clamp or vice.
50) Do not use the LED light as a flash-
light.
As it does not provide sufficient bright-
ness, moving about in a dark location
while using the LED light for illumina-
tion could result in an accident.
51) During use, do not wear gloves such
as work gloves that could get caught
by the drill. They could get caught by
the rotating portion of the drill, which
may result in injury.
52) Do not move violently when using a
hook. This could result in damage due
to the device falling.
53) During use, do not allow the rotating
portion of the drill or cutting scraps to
come near your body or parts of your
body. The bit could come loose or
break unexpectedly, or cutting scraps
could come into contact with your
body, which may result in injury.
Pointed tools such as drill bits should
be periodically replaced.
Symbol
(EY79A2 only)
WARNING
• Do not use other than the Panasonic
battery packs that are designed for use
with this rechargeable tool.
• Panasonic is not responsible for any
damage or accident caused by the use
of recycled or counterfeit battery pack.
• Do not dispose of the battery pack in a
fire, or expose it to excessive heat.
• Do not allow metal objects to touch the
battery pack terminals.
• Do not carry or store the battery pack in
the same container as nails or similar
metal objects.
• Do not charge the battery pack in a
high-temperature location, such as next
to a fire or in direct sunlight. Otherwise,
the battery may overheat, catch fire, or
explode.
- 12 -
Meaning
Volts
Direct current
No load speed
Revolutions or recip-
rocations per minutes
Electrical capacity of
battery pack
Rotation only
Rotation with
hammering
Read the operating
instructions before
use.
For indoor use only.

Publicidad

loading

Este manual también es adecuado para:

Ey79a2