Nexgrill 720-0778B Manual Del Usuario página 13

4. Back Panel Assembly
Remove the back panel from the carton. Position the
back panel (I) with the flat side facing outward. Attach
the back panel to the bottom panel (B) with three 1/4-
in. x 15 mm truss head screws with locking washers
(CC) as shown in Fig. 4.
Use six 1/4-in. x 15 mm
locking washers (CC) to connect the back panel (I)
to the right and left side panels as shown in Fig. 5.
5. Door and Firebox Assembly
Remove the firebox assembly (A) from the carton
and carefully place onto the grill cart, at the same
time keeping the top door hinge in place as shown
in Fig. 6.
CAUTION The firebox assembly is heavy and
will require two or more people to lift and
position onto grill cart. Failure to do so may
result in injury.
Note: Take care when moving the firebox
assembly as the bottom flanges can be bent,
which would misalign the holes.
truss head screws with
Assembly Instructions
Fig. 4
3X
CC
B
Fig. 5
Fig. 6
A
I
6X
CC
I
Grill Cart
13