Nexgrill 720-0778B Manual Del Usuario página 16

Parrilla de gas para exteriores

Idiomas disponibles

8d). Align the bottom key holes on side burner shelf (D)

with 2 loosened screws on right side panel. Attach the

side burner bowel to the cart with the two loosened

screws on the side panel as shown in Fig.14

Tip: This step is meant to help with the installation but

does

not depend solely on the two screws to hold the

weight of the side burner shelf.

8e). Use two 1/4-in. x

15 mm

(FF) and two 1/4-in. flat washer (II) to keep the

right side burner shelf in place (these two 1/4-in

screws are screwed through the front and the

rear screw holes which are located on the top of

right side burner shelf). See Fig. 15.

Note: The top 2 screws of the firebox should be

screwed from inside to outside for right side

burner shelf. But bottom 2 screws should be

tightened from outside to inside.

8f). Use one 5/32-in. x

10 mm

and one 5/32-in. flat washer (HH) to screw the middle

screw hole in the top of right side burner shelf.

Attach right side burner control panel to the main control

panel by using one 5/32-in. x

(BB) and one 5/32-in flat washer (HH) as shown in

Fig. 15.

Note: The top 1 screw of the firebox should be screwed

from inside to outside for right side burner shelf. But

bottom 1 screw should be tightened from outside to

inside.

9. Left Side Shelf Assembly

Repeat step 8 for the left side shelf (F). Screw

bottle opener on left side shelf.

truss head screws

truss head screw (BB)

10 mm

truss head screw

Assembly Instructions

Fig.14

Fig.15