Skil BL4713C-00 Manual Del Propietário página 12

To Assemble the Blower Tube
WARNING
serious personal injury, always remove the
battery pack from the tool when assembling
parts .
Align the groove in the tube with the knob
•
on the blower housing. Push the tube onto
the blower housing until the latch snaps into
place (Fig. 2).
To remove the tube, press and hold the tube-
•
release button to disengage the latch, then
pull the tube straight from the blower (Fig. 3).
12
To prevent accidental
starting that could cause
Fig. 2a
Fig. 2b
Fig. 3