Skil BL4713C-00 Manual Del Propietário página 14

With the Air-Velocity Adjustment Lever
(Fig . 7):
Pull the air-velocity adjustment lever down to
•
turn on the blower.
As the air-velocity adjustment lever is pulled
•
down, the variable-speed trigger switch
is synchronously depressed in without
manual operation, and the air speed is
simultaneously increased.
The air-velocity adjustment lever will stay
•
in the position where you release it. The air
speed is kept as you set it.
Your blower can only reach the maximum
•
air velocity by pulling the lever to the limited
position.
Push the air-velocity adjustment lever all the way up to turn off the blower.
•
NOTICE: The air-velocity adjustment lever must be always pushed all the way up before
turning off the blower.
WARNING
To Operate the Blower
To keep from scattering debris, blow around the outer edges of a debris pile. Never blow
•
directly into the center of a pile.
To reduce sound levels, limit the number of pieces of equipment used at any one time.
•
Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen
•
surfaces if water is available.
Conserve water by using power blowers instead of hoses for many lawn and garden
•
applications, including areas such as gutters, screens, patios, grills, porches, and gardens.
Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely
•
away.
After using blowers or other equipment, clean up! Dispose of debris properly.
•
14
Always remove the battery pack from the blower during work breaks
and after finishing work.
Fig. 7
Air-Velocity
Adjustment
Lever